System information

NNN-NNN r001 Enecsys Gateway Guide 15
Table 1. Gateway default view functional areas
Area Description
1
Status Bar: General information Display of system time and date
2
Status Bar: Component communication
status
a. Number of inverters communicating
b. Number of repeaters communicating
3
Status Bar: Communication link c. Communication connection: Ethernet or stand-alone
d. Communication linked to internet
4
Daily Energy at-a-glance Compares the day’s energy production to lifetime data
5
Active areas Navigate from default view to power generation comparison
graphs and installer functions
Table 2. Status bar troubleshooting
Status bar display Description State
Number of online inverters “0” (zero) is the number displayed. There is no communication between the
gateway and inverters. It may be neces-
sary to install one or more repeaters.
Number of online inverters Number displayed equals the
number of inverters.
Communication is good and connections
are properly made.
Number of online inverters Number displayed does not equal
the number of inverters.
Possible malfunction, pinched inverter ca-
bling, or connection problem. User should
contact the installer.
Installer may need to test connection. It
may be necessary to move the Gateway
and or repeater(s). If possible, trouble-
shoot via the Monitoring Site.
4.3. Navigating views using touch controls
Figure 6. Gateway navigation touch controls
• Once the gateway has been installed, the default view will display.
Navigate to:
energy graph
Navigate to:
installer settings