MSDS

ENDUROCLEAN POLISHING LIQUID
Product Name
SWA - Safe Work Australia.
TWA - Time Weighted Average.
HEALTH EFFECTS FROM EXPOSURE:
It should be noted that the effects from exposure to this product will depend on several factors including: frequency
and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of
application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible
scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.
PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:
The recommendation for protective equipment contained within this Chem Alert report is provided as a guide only.
Factors such as method of application, working environment, quantity used, product concentration and the
availability of engineering controls should be considered before final selection of personal protective equipment is
made.
Report Status This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the
manufacturer's Safety Data Sheet ('SDS').
It is based on information concerning the product which has been provided to RMT by the manufacturer or
obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate
safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of
the product should be obtained directly from the manufacturer.
While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide
any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss,
injury or damage (including consequential loss) which may be suffered or incurred by any person as a
consequence of their reliance on the information contained in this SDS.
Prepared By Risk Management Technologies
5 Ventnor Ave, West Perth
Western Australia 6005
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.rmt.com.au
15 Oct 2010
End of Report
SDS Date
Page 4 of 4
Reviewed: 15 Oct 2010
Printed: 15 Oct 2010
RMT