MSDS

ENDUROCLEAN POLISHING LIQUID
Product Name
Hazchem Code None Allocated
Spillage If spilt (bulk), mop up area. Use personal protective equipment. Clean spill site with water. CAUTION: Spill site
may be slippery.
Handling
Store in a cool, dry, well ventilated area, removed from oxidising agents, acids and foodstuffs. Ensure containers
are adequately labelled, protected from physical damage and sealed when not in use. Check regularly for leaks or
spills.
Storage
Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin
contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,
drinking and smoking in contaminated areas.
6. ACCIDENTAL RELEASE MEASURES
7. STORAGE AND HANDLING
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
Exposure Stds No exposure standard(s) allocated.
Engineering
Controls
Avoid inhalation. Use in well ventilated areas.
Wear splash-proof goggles and PVC or rubber gloves. When using large quantities or where heavy contamination
is likely, wear: coveralls.
PPE
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance PALE YELLOW LIQUID Solubility (water) SOLUBLE
Odour SLIGHT ODOUR Specific Gravity 1 (Approximately)
pH 6 to 7 % Volatiles NOT AVAILABLE
Vapour Pressure NOT AVAILABLE Flammability NON FLAMMABLE
Vapour Density NOT AVAILABLE Flash Point NOT RELEVANT
Boiling Point 212°F (Approximately) Upper Explosion Limit NOT RELEVANT
Melting Point < 32°F Lower Explosion Limit NOT RELEVANT
Evaporation Rate NOT AVAILABLE
Chemical Stability Stable under recommended conditions of storage.
Conditions to Avoid Avoid heat, sparks, open flames and other ignition sources.
10. STABILITY AND REACTIVITY
Material to Avoid Incompatible with oxidising agents and acids (eg. nitric acid).
Hazardous
Decomposition
Products
May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition.
Hazardous Reactions Polymerization is not expected to occur.
Health Hazard
Summary
Low toxicity - irritant. Use safe work practices to avoid eye or skin contact and inhalation. Over exposure may
result in irritation.
Eye Irritant. Contact may result in irritation, lacrimation, pain and redness.
Inhalation Low irritant. Over exposure may result in irritation of the nose and throat, with coughing. Due to the low vapour
pressure, an inhalation hazard is not anticipated with normal use.
Skin Irritant. Contact may result in irritation, redness and rash.
Ingestion Low toxicity. Ingestion of large quantities may result in nausea, vomiting and gastrointestinal irritation.
Toxicity Data 1,2-BENZISOTHIAZOLIN-3-ONE (2634-33-5)
11. TOXICOLOGICAL INFORMATION
Page 2 of 4
Reviewed: 15 Oct 2010
Printed: 15 Oct 2010
RMT