MSDS

Material Safety Data Sheet
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
ENDUROCLEAN POLISHING LIQUID
PCT GLOBAL LLC
PO Box 20274, Santa Barbara, California, 93120, UNITED STATES
+ 1 805 617 4609
+ 1 800 424 9300
ENDUROCLEAN POLISHING LIQUID
STAINLESS STEEL POLISHING
15 Oct 2010
Supplier Name
Address
Telephone
Emergency
Synonym(s)
Use(s)
SDS Date
Product Name
2. HAZARDS IDENTIFICATION
Refer to Toxicological Information: Section 11
Health
Flammability
Physical Hazard
Personal Protection
0
0
1
HMIS NFPA
Health Hazard
Flammability
Instability
Special Hazards
3. COMPOSITION/ INFORMATION ON INGREDIENTS
Ingredient CAS No. Content
1,2-BENZISOTHIAZOLIN-3-ONE 2634-33-5 <1%
2-METHYL-4-ISOTHIAZOLIN-3-ONE 2682-20-4 <1%
WATER 7732-18-5 >60%
ADDITIVE(S) Not Available remainder
Eye If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a
Poisons Information Centre, a physician, or for at least 15 minutes.
Skin If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue
flushing with water until advised to stop by a Poisons Information Centre or a physician.
Inhalation If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.
Ingestion For advice, contact the Poison Control Centre at 1-800-222-1222 or a physician (at once). If swallowed, do not
induce vomiting.
Advice to Doctor Treat symptomatically.
4. FIRST AID MEASURES
Fire and
Explosion
Treat as per requirements for Surrounding Fires: Evacuate area and contact emergency services. Remain upwind
and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing
Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas.
Extinguishing Prevent contamination of drains or waterways.
Flammability Non flammable. May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition.
5. FIRE FIGHTING MEASURES
Page 1 of 4
Reviewed: 15 Oct 2010
Printed: 15 Oct 2010
RMT