MSDS

ENDUROSHIELD HOME STAINLESS STEEL WIPES (US)
Product Name
Report status This document has been compiled by RMT on behalf of the manufacturer, importer or supplier of the
product and serves as their Safety Data Sheet ('SDS').
It is based on information concerning the product which has been provided to RMT by the
manufacturer, importer or supplier or obtained from third party sources and is believed to represent
the current state of knowledge as to the appropriate safety and handling precautions for the product
at the time of issue. Further clarification regarding any aspect of the product should be obtained
directly from the manufacturer, importer or supplier.
While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does
not provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts
no liability for any loss, injury or damage (including consequential loss) which may be suffered or
incurred by any person as a consequence of their reliance on the information contained in this SDS.
Prepared by
Risk Management Technologies
5 Ventnor Ave, West Perth
Western Australia 6005
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.rmt.com.au.
Prepared in accordance to OSHA Hazard Communication standard, 29 CFR 1920.1200.
Revision:
1
SDS Date:
03 Dec 2013
End of SDS
Page 7 of 7
03 Dec 2013
SDS Date: