Instructions / Assembly

5Version 1.9
English
5) Once the boom is secure, tighten the
hardware on the boom brackets from
step 2 to make sure they are also secure.
6) Take the feed hoses from boom and
connect to male brass hose fittings on
spray unit. Hook hoses up to the appro-
priate section control; 12’, 20’ and 30’
booms have 3 hose hookups and boom-
less nozzle has 2 hose hookups.
7) If you got the 30’ boom extensions,
once the 20’ boom is mounted, bolt on
the extensions to the 20’ boom ends
with provided 5/16” x 2” bolts, installing
them through the wing extension and
boom end.
8) Then, hook up the wing extension
hoses to the end of boom using the
brass threaded connectors. Make sure
the rubber washer is in the female brass
fitting to prevent leaking.
Mounting Your Boom
GETTING STARTED
Installing 30’ Wing Extension