Instructions / Assembly

17Version 1.9
English
WINTERIZING
1) Drain Tank
Fill the tank with clean water, start the
pump and open all spray ends. If you
have a spray gun or boom, make sure
you spray until clean water is coming
through.
2) Blow out Plumbing Lines
Using compressed air, blow out the hose
lines on sprayer and boom to remove all
water from the system.
3) Flush with Anti-freeze
Pour a small amount of anti-freeze into
the tank and run the pump until there is
no more of this colored liquid coming
through the spray ends.
4) Store Sprayer Inside
Turn o the sprayer ends so the remain-
ing anti-freeze does not leak out. If you
have a boom attachment that hangs low-
er than the sprayer, we would suggest
you set the sprayer on a few pallets.