User manual

E4 CONSOLE

INSTALLING BATTERIES

If your E4 batteries have not already been installed by your retailer, please

install them now. The console uses two AA batteries. Install the batteries in

the battery compartment in the back

of the console.

CONVERTING FROM METRIC TO STANDARD

First flip the switch located in the reverse side of the panel. Then, take the

batteries out and replace them. When the machine powers back up the

readout will sw

itch.

TURNING THE SCREEN DISPLAY ON

You can turn your console on by either pressing the RESET button at the

bottom right of the console or by simply getting on your elliptical and begin-

ning your stride.

CLEARING PREVIOUSLY STORED INFORMATION

Your elliptical will retain information from your previous workout such as

calories and distance for a few minutes. You can clear this information by

pressing RESET.

CONSOLE FEEDBACK

Your E4 provides you with the information you need for an

effective workout every time.