User's Manual

DRAFT
Micropilot FMR53, FMR54
Endress+Hauser V. 1, Rev. 7, 26-10-2012 39
Horn antenna (FMR54)
Alignment
• Align the antenna vertically to the product surface.
• A marking at the flange enables axial alignment of the antenna. This marking must be aligned towards the
tank wall.
90°
90°
90°
90°
90°
90°
90°
90°
90°
90°
A
B
A0018974
Nozzle mounting
The horn antenna must extend below the nozzle; if necessary select the device version with antenna
extension 100 to 400 mm (4 to 16 in)
4)
.
H
1
øD
A0016822
å 13
Nozzle height and diameter for the horn antenna (FMR54)
1
Mounting nozzle
Antenna size
150 mm (6 in) 200 mm (8 in) 250 mm (10 in)
D
146 mm (5.75 in) 191 mm (7.52 in) 241 mm (9.49 in)
H
< 205 mm (8.07 in) < 290 mm (11.4 in) < 380 mm (15 in)
4) See product structure: feature 610 "Accessory Mounted", options OM, ON, OR, OS.