User's Manual

Micropilot FMR20
46 V. 5, Rev. 3, 20-12-2016 Endress+Hauser
A B C D Weight Sensor,process
connection
front side
Material Order No.
585 mm
(23 in)
250 mm
(9.84 in)
2 mm
(0.08 in)
200 mm
(7.87 in)
1.9 kg
(4.19 lb)
1-1/2" Steel, hot-dip
galvanized
52014131
316Ti
(1.4571)
52014132
2" Steel, hot-dip
galvanized
52014135
316Ti
(1.4571)
52014136
1 085 mm
(42.7 in)
750 mm
(29.5 in)
3 mm
(0.12 in)
300 mm
(11.8 in)
4.4 kg
(9.7 lb)
1-1/2" Steel, hot-dip
galvanized
52014133
316Ti
(1.4571)
52014134
2" Steel, hot-dip
galvanized
52014137
316Ti
(1.4571)
52014138
• 50 mm (2.17 in) or 62 mm (2.44 in) openings for all connections on front G 1-1/2" (MNPT
1-1/2") or G 2" (MNPT 2").
• 22 mm (0.87 in) Opening can be used for an additional sensor.
Retaining screws are included in delivery.
Mounting stand for cantilever with pivot
3.2 (0.13)
20 (0.8)
55 (2.17)
100 (3.94)
25 (0.98)
700/1400
(27.6 / 55.1)
45 (1.77)
76
(2.99)
100
(3.94)
200 (7.87)
13 (0.5)
ø33.7 (1.3)
130 (5.12)
150 (5.91)
100
(3.94)
60 (2.36)
4 (0.16)
6.5 (0.3)
A0019279
 42 Dimensions of mounting frame, engineering unit: mm (in)
Height Material Weight Order No.
700 mm (27.6 in) Steel, galvanized 3.2 kg (7.06 lb) 919791-0000
700 mm (27.6 in) 316Ti (1.4571) 919791-0001
1 400 mm (55.1 in) Steel, galvanized 4.9 kg (10.08 lb) 919791-0002
1 400 mm (55.1 in) 316Ti (1.4571) 919791-0003