Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
iTEMP TMT72 Operating menu and parameter description
Endress+Hauser 95
Additional information Value
A0014564
Value + bar graph
A0014563
Value 1 display (Value 2 or 3 display)
Navigation System → Display → Format display → Value 1 display (Value 2 or 3 display)
Description Use this function to select one of the measured values shown on the local display.
The Format display parameter is used to specify how the measured values are
displayed.
Options • Process value
• Device temperature
• Output current
• Percent of range
• Off
Factory setting Process value
Decimal places 1 (decimal places 2 or 3)
Navigation System → Display → Format display → Decimal places 1 (Decimal places 2 or 3)
Prerequisite A measured value is defined in the parameter Value 1 display (Value 2 or 3 display).
Description Use this function to select the number of decimal places for the display value. This setting
does not affect the accuracy of the device for measuring or calculating the value.
If Automatic is selected, the maximum possible number of decimal places is always
shown on the display.