Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
iTEMP TMT72 Operating menu and parameter description
Endress+Hauser 93
Navigation System → Information → HART info → Hardware revision
Software revision
Navigation System → Information → HART info → Software revision
Description Displays the software revision of the device.
HART date code
Navigation System → Information → HART info → HART date code
Description Use this function to define date information for individual use.
User entry Date in the format year-month-day (YYYY-MM-DD)
Factory setting 2010-01-01
1)
1) Also 01.01.2010 depending on the operating tool
Manufacturer ID
Navigation System → Information → HART info → Manufacturer ID
Description Displays the manufacturer ID under which the device is registered with the HART
FieldComm Group.
User interface 4-digit hexadecimal number
Factory setting 0x0011
Device ID
Navigation System → Information → HART info → Device ID
Description A unique HART identifier is saved in the device ID and used by the control systems to
identify the device. The device ID is also transmitted in command 0. The device ID is
determined unambiguously from the serial number of the device.
User interface ID generated for specific serial number