Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
Operating menu and parameter description iTEMP TMT72
92 Endress+Hauser
Device revision
Navigation System → Information → HART info → Device revision
Description Displays the device revision with which the device is registered with the HART
®
FieldComm
Group. It is needed to assign the appropriate device description file (DD) to the device.
User interface Revision in hexadecimal format
Factory setting 0x01
HART revision
Navigation System → Information → HART info → HART revision
Description Displays the HART revision of the device.
HART descriptor
Navigation System → Information → HART info → HART descriptor
Description Use this function to define a description for the measuring point.
User entry Up to 16 alphanumeric characters (uppercase letters, numbers and special characters)
Factory setting 16 x '?'
HART message
Navigation System → Information → HART info → HART message
Description Use this function to define a HART message which is sent via the HART protocol when
requested by the master.
User entry Up to 32 alphanumeric characters (uppercase letters, numbers and special characters)
Factory setting 32 x '?'
Hardware revision → 89