Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
Operating menu and parameter description iTEMP TMT72
90 Endress+Hauser
Device location submenu
Latitude
Navigation System → Information → Device location → Latitude
Description Use this function to enter the latitude coordinates that describe the device location.
User entry –90.000 to +90.000 °
Factory setting 0
Longitude
Navigation System → Information → Device location → Longitude
Description Use this function to enter the longitude coordinates that describe the device location.
User entry –180.000 to +180.000 °
Factory setting 0
Altitude
Navigation System → Information → Device location → Altitude
Description Use this function to enter the altitude data that describe the device location.
User entry –1.0 · 10
+20
to +1.0 · 10
+20
m
Factory setting 0 m
Location method
Navigation System → Information → Device location → Location method
Description Use this function to select the data format for specifying the geographic location. The
codes for specifying the location are based on the US National Marine Electronics
Association (NMEA) Standard NMEA 0183.