Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
iTEMP TMT72 Operating menu and parameter description
Endress+Hauser 89
Navigation System → Information → Device → Firmware version
Description Displays the device firmware version installed.
User interface Max. 6-digit character string in the format xx.yy.zz
Hardware revision
Navigation System → Information → Device → Hardware revision
Description Displays the hardware revision of the device.
Extended order code (n)
n = Number of parts of the extended order code (n = 1 to 3)
Navigation System → Information → Device → Extended order code n
Description Displays the first, second and/or third part of the extended order code. On account of
length restrictions, the extended order code is split into a maximum of 3 parameters. The
extended order code indicates the version of all the features of the product structure for
the device and thus uniquely identifies the device. It can also be found on the nameplate.
• Uses of the extended order code
• To order an identical spare device.
• To check the ordered device features using the delivery note.
Device name
Navigation System → Information → Device → Device name
Description Displays the device name. It can also be found on the nameplate.
Manufacturer
Navigation System → Information → Device → Manufacturer
Description Displays the name of the manufacturer.