Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
iTEMP TMT72 Operating menu and parameter description
Endress+Hauser 87
Delete password
Navigation System → User management → Delete password
Prerequisite The Maintenance user role must be active.
Description The password currently valid is deleted.
The Define password button appears.
User entry Activate the Delete password button.
14.3.3 Bluetooth configuration submenu
Bluetooth
Navigation System → Bluetooth configuration → Bluetooth
Description Use this function to enable or disable the Bluetooth function.
• Off: The Bluetooth interface is disabled immediately.
• On: The Bluetooth interface is enabled and a connection to the device can be established.
Bluetooth communication is only possible if the CDI and display interface is not used.
Options • Off
• On
Factory setting On
Change Bluetooth password
1)
1) Function is only visible in the SmartBlue app
Navigation System → Bluetooth configuration → Change Bluetooth password
Description Use this function to change the Bluetooth password. This function is visible in the
SmartBlue app only.
Prerequisite The Bluetooth interface is enabled (ON) and a connection to the device is established.
User entry Enter:
• User name
• Current password
• New Password
• Confirm new password
Press OK to confirm your entries.