Operating Instructions

iTEMP TMT72 Operating menu and parameter description
Endress+Hauser 83
Factory setting Not active
Configuration counter
Navigation System → Device management → Configuration counter
Description Displays the counter reading for changes to device parameters.
Static parameters, whose values change during optimization or configuration, cause
this parameter to increment by 1. This supports parameter version management. If
several parameters change, e.g. as a result of loading parameters from FieldCare etc.
to the device, the counter can show a higher value. The counter cannot be reset and is
also not reset to the default value when the device is reset. If the counter overflows,
(16 bit), it starts again at 1.
Configuration changed
Navigation System → Device management → Configuration changed
Description Displays whether the configuration of the device has been changed by a master (primary
or secondary).
14.3.2 User management submenu
Define password →
Maintenance
New Password
Confirm new password
Status password entry
Change user role →
Operator
Password
1)
Status password entry
Recover password →
Operator
Recover password
Status password entry
Change password →
Maintenance
Old password
New Password
Confirm new password
Status password entry
Delete password →
Maintenance
Delete password
1) The required user role must first be selected here when operating the device via the SmartBlue app.