Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
Operating menu and parameter description iTEMP TMT72
80 Endress+Hauser
14.2.5 Submenu: HART configuration
Assign current output (PV)
Navigation Application → HART configuration → Assign current output (PV)
Description Use this function to assign the measured variables to the primary HART
®
value (PV).
User interface Sensor
Factory setting Sensor (fixed assignment)
Assign SV
Navigation Application → HART configuration → Assign SV
Description Use this function to assign the measured variable to the secondary HART value (SV).
User interface Device temperature (fixed assignment)
Factory setting Device temperature (fixed assignment)
Assign TV
Navigation Application → HART configuration → Assign TV
Description Use this function to assign the measured variable to the tertiary HART value (TV).
User interface Sensor (fixed assignment)
Factory setting Sensor (fixed assignment)
Assign QV
Navigation Application → HART configuration → Assign QV
Description Use this function to assign the measured variable to the quaternary (fourth) HART value
(QV).
User interface Sensor (fixed assignment)
Factory setting Sensor (fixed assignment)