Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
Operating menu and parameter description iTEMP TMT72
72 Endress+Hauser
Navigation Application → Measured values → Sensor value
Description Displays the current measured value at the sensor input.
Sensor raw value
Navigation Application → Measured values → Sensor raw value
Description Displays the non-linearized mV/Ohm value at the specific sensor input.
Output current
Navigation Application → Measured values → Output current
Description Displays the calculated output current in mA.
Percent of range
Navigation Application → Measured values → Percent of range
Description Displays the measured value in percentage of the span
Device temperature
Navigation Application → Measured values → Device temperature
Description Displays the current electronics temperature.
PV
Navigation Application → Measured values → PV
Description Displays the primary device variables.
SV