Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
Operating menu and parameter description iTEMP TMT72
70 Endress+Hauser
Navigation Diagnostics → Diagnostic settings → Diagnostic behavior
Description Each diagnostic event is assigned a certain diagnostic behavior. The user can change this
assignment for certain diagnostic events. → 39
Selection • Alarm
• Warning
• Disabled
Factory setting See the list of diagnostic events → 39
Status signal
Navigation Diagnostics → Diagnostic settings → Status signal
Description Each diagnostic event is assigned a certain status signal at the factory
1)
. The user can
change this assignment for certain diagnostic events. → 39
1) Digital information available via HART® communication
Selection • Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• No effect (N)
Factory setting See the list of diagnostic events → 39
14.1.6 "Min/max values" submenu
Sensor min value
Navigation Diagnostics → Min/max values → Sensor min value
Description Displays the minimum temperature measured in the past at the sensor input (minimum
indicator).
Sensor max. value
Navigation Diagnostics → Min/max values → Sensor max value
Description Displays the maximum temperature measured in the past at the sensor input (maximum
indicator).