Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Incoming acceptance and product identification
- 4 Installation
- 5 Electrical connection
- 6 Operation options
- 7 System integration
- 8 Commissioning
- 9 Diagnostics and troubleshooting
- 10 Maintenance
- 11 Repair
- 12 Accessories
- 13 Technical data
- 14 Operating menu and parameter description
iTEMP TMT72 Operating menu and parameter description
Endress+Hauser 65
14.1 Menu: Diagnostics
14.1.1 Submenu: Actual diagnostics
Actual diagnostics 1
Navigation Diagnostics → Actual diagnostics → Actual diagnostics 1
Description Displays the current diagnostic message. If two or more messages occur simultaneously,
the message with the highest priority is shown on the display.
Additional information Example for display format:
F041-Sensor interrupted
Operating time
Navigation Diagnostics → Actual diagnostics → Operating time
Description Displays the length of time the device has been in operation.
User interface Hours (h)
14.1.2 "Diagnostic list" submenu
n = Number of diagnostic messages (n = 1 to 3)
Actual diagnostics n
Navigation Diagnostics → Actual diagnostics → Actual diagnostics n
Description Displays the current diagnostic message. If two or more messages occur simultaneously,
the message with the highest priority is shown on the display.
Additional information Example for display format:
F041-Sensor interrupted
Actual diag channel n
Navigation Diagnostics → Actual diagnostics → Actual diag channel n
Description Displays the function module to which the diagnostic message refers.