Operating Instructions

iTEMP TMT72 Maintenance
Endress+Hauser 41
Date Firmware version Changes Documentation
11/2018 01.01.zz Original firmware BA01854T/09/en/01.18
10 Maintenance
No special maintenance work is required for the device.
Cleaning
A clean, dry cloth can be used to clean the device.
11 Repair
11.1 General information
Due to its construction, the device cannot be repaired.
11.2 Spare parts
Spare parts currently available for the device can be found online at:
http://www.products.endress.com/spareparts_consumables. Always quote the serial
number of the device when ordering spare parts!
Type Order number
Standard - DIN securing set (2 screws and springs, 4 shaft lock-down rings, 1 plug for the
display interface)
71044061
US - M4 securing set (2 screws and 1 plug for the display interface) 71044062
Commubox FXA195 HART
®
, For intrinsically safe HART® communication with FieldCare via
the USB interface.
FXA195-.......
11.3 Return
The measuring device must be returned if it is need of repair or a factory calibration, or if
the wrong measuring device has been delivered or ordered. Legal specifications require
Endress+Hauser, as an ISO-certified company, to follow certain procedures when handling
products that are in contact with the medium.
To ensure safe, swift and professional device returns, please refer to the procedure and
conditions for returning devices provided on the Endress+Hauser website at
http://www.endress.com/support/return-material
11.4 Disposal
The device contains electronic components and must, therefore, be disposed of as
electronic waste in the event of disposal. Pay particular attention to the local regulations
governing waste disposal in your country.