Product Info

iTEMP TMT142
Endress+Hauser 23
System products
Accessories Description
RN221N Active barrier with power supply for safe separation of 4 to 20 mA standard signal
circuits. Has bidirectional HART
®
transmission and optional HART
®
diagnostics if
transmitters are connected with monitoring of 4 to 20 mA signal or HART
®
status
byte analysis and an E+H-specific diagnostic command.

For details, see Technical Information TI073R/09
RIA15 Process display, digital loop-powered display for 4 to 20 mA circuit, panel
mounting, with optional HART
®
communication. Displays 4 to 20 mA or up to 4
HART
®
process variables

For details, see Technical Information TI01043K/09
Graphic Data Manager
Memograph M
The Advanced Data Manager Memograph M is a flexible and powerful system for
organizing process values. Optional HART® input cards are available, each with 4
inputs (4/8/12/16/20), with highly accurate process values from the HART®
devices directly connected for the purpose of calculation and data logging. The
measured process values are clearly presented on the display and logged safely,
monitored for limit values and analyzed. Via common communication protocols,
the measured and calculated values can be easily communicated to higher-level
systems or individual plant modules can be interconnected.

For details, see Technical Information TI01180R/09
Supplementary documentation
• Operating Instructions ’iTEMP TMT142’, HART® communication (BA00191R/09) and associated
printed Brief Operating Instructions ’iTEMP TMT142’ (KA00222R/09)
• Supplementary ATEX documentation:
ATEX/IECEx: II1G Ex ia IIC T6…T4 Ga: XA01957T/09
II1G Ex ia IIC; II2D Ex ia IIIC: XA01958T/09
II2G Ex db IIC Gb: XA01959T/09
II2D Ex tb IIIC T110 °C Db: XA01959T/09
• Supplementary documentation CSA:
XP, DIP, NI: XA01977T/09
Intrinsic safety: XA01979T/09