Product Info

iTEMP TMT142
Endress+Hauser 17
Mechanical construction
Design, dimensions
Dimensions in mm (in)
132 (5.2)
135 (5.3)
112 (4.4)
106 (4.2)
121 (4.8)
121 (4.8)
!6.4
(0.25)
0
10
30
40
50
20
°F
A0025824
 8 Die-cast aluminum housing for general applications, or optional stainless steel housing (316L)
• Electronics module and connection compartment
• Display attachable in 90° stages
Weight
• Aluminum housing approx. 1.4 kg (3 lb), with display
• Stainless steel housing approx. 4.2 kg (9.3 lb), with display
Materials
Housing Sensor terminals Nameplate
Die-cast aluminum housing AlSi10Mg/
AlSi12 with powder coating on
polyester base
Nickel-plated brass 0.3 µm
gold flashed / cpl.,
corrosion-free
Aluminum AlMgl, anodized in black
316L 1.4404 (AISI 316L)
O-ring 88x3 HNBR 70° Shore PTFE
coating
- -
Cable entries
Version Type
Thread 3x thread ½" NPT
3x thread M20
3x thread G½"
Operability
Operating concept
There are different options available for configuring and commissioning the device:
• Configuration programs
The setup and the configuration of device-specific parameters is performed via the HART®
protocol. Special configuration and operating programs are available from various manufacturers
for this purpose.
• Miniature switch (DIP switch) for diverse hardware settings
Hardware write protection or the Bluetooth® function is activated and deactivated via a miniature
switch (DIP switch) on the electronics module.