User Manual

5
© 2019 Endotronix® Inc. 100469-00 Rev. 2
The Cordella™ Pulmonary Artery Sensor System
Cordella Pulmonary Artery Sensor System is an innovative
myCordella™ peripheral designed for on-demand measurement of PA
pressure from your home. This may help your healthcare providers
identify pulmonary congestion suggestive of worsening heart failure
through trends in PA pressures.
Component Name
myCordella™ Patient Reader
(Reader)
Device that collects pulmonary artery pressure
data from the Cordella Sensor. Each day, you will
hold the wireless Reader against your chest for
approximately 18 seconds, guided by audio and
visual cues on the myCordella™ Hub and Reader.
The Reader sends data to the Hub provides daily
PA pressure readings to your clinician on the
myCordella™ Patient Management Portal,
enabling a more complete picture of your health
status.
myCordella™ Docking Station
(Docking Station)
Small stand that conveniently holds and charges
the Patient Reader while you are not using it. The
Reader should always remain in the Docking
Station unless it is in use or it is packed for
traveling. LED lights on the front will indicate if the
Reader is charging or fully charged.
Cordella™ Pulmonary Artery Sensor
(Cordella Sensor)
Small implant that resides permanently in the
pulmonary artery. The Cordella Sensor will enable
PA pressure measurements with the myCordella
Patient Reader while at home. The Reader will
collect and securely transmit PA pressure readings
to the clinician. Measurements from this device
are equivalent to those obtained by trained clinical
personnel using invasive, fluid-filled catheter-
based products.