Use Instructions

Instructions For Use | 3736 | © 2018 Endotronix Inc.
100474-00 Rev 1
9. Reader/Docking Station Audio &
Visual Cues
Reader Audio Cues
Event Sound Required Action
Searching for
Implant
Two descending beeps,
repeating every ~2
seconds
Reposition Reader to find
stronger signal.
Implant
Located
Four quickly ascending,
high pitched beeps,
repeating three times
Strong signal found. Hold
Reader in place.
Reading in
Progress
Two quickly ascending
beeps, repeating every ~3
seconds
Hold Reader in place (~18
seconds).
Successful
Implant
Reading
Several quickly
ascending, high pitched
beeps
Measurement complete.
Return Reader to Docking
Station.
Failed Reading Several slowly
descending, low pitched
beeps
Reposition Reader to find
stronger signal.
Return to
Docking Station
Successful Reading
sound repeating
periodically
Return to Docking Station.
If Reader is there, check
Docking Station visual
cues.
Low Battery Three quick, low pitched
beeps, repeating every
~10 seconds
When accompanied by
solid yellow light, return to
Docking Station.
Contact
Customer
Support
Three quick, low pitched
beeps, repeating every
~10 seconds
When accompanied by
flashing red light, call
Customer Support.
Reader Visual Cues
Light Event/Required Action
Solid Blue Searching for Sensor.
Slowly Flashing Blue Return to Docking Station.
Rapidly Flashing Blue Sensor located. Ready to begin reading.
Slowly Flashing Green Reading in progress. Hold Reader in place until
light becomes solid green.
Solid Green Successful implant reading.
Rapidly Flashing Yellow Failed reading. Reposition Reader.
Solid Yellow Low battery. Return to Docking Station.
Rapidly Flashing Red Contact Endotronix Customer Support.
Light Off Out of battery. Return to Docking Station.
Docking Station Visual Cues
Light Event/Required Action
Flashing White The Reader is being charged.
Solid White The Reader is fully charged and ready for use.
No Light
When the Reader is docked and no light is present, the
Docking Station is not connected to a power source.
Check that the Docking Station Power Cord is plugged
into both Docking Station and the CalEQ power strip and
that the power strip is plugged into an outlet. If the light
remains off, contact Customer Support. To turn off audio
and visual cues from the Reader during this time, press
and hold the small button at the base of the Reader for
several seconds.