Use and Care Manual

6
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.888.398.8643 toll-free. Please have
your owner’s manual and model number available for
reference.
Note: The model number is printed on a label which can be found on
the inside door, back or side of the base assembly.
Assembly Tips:
1. Select an area where you will assemble this product. To
protect components, choose a smooth surface that’s free of
cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before
completing each step, go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or
strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the “Operating Instructions” section of
this manual).
• (1) Precision-filled LP gas grill tank with Acme Type 1 external
threaded valve connection (standard grill size) (not included).
Typical assembly is approximately one hour.
W CAUTION: Two (2) people will be required for assembly.
W WARNING: Failure to position the parts in accordance with
these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage
or personal injury.
3
Attach Legs and Door Posts
Note: Do not fully tighten srews until step 5.
B
x 8
4
Attach Side and Rear Panels
Note: Attach bottom screws before attaching top screws. Do not fully tighten srews
until step 5.
A
x 12
B
A
2
Remove Protective Corners and Remove Mantel from
Frame
W CAUTION: Two (2) people will be required for this step.
W CAUTION: Disassemble mantel glass piece carefully. Set in a
safe place to avoid scratches and damage.
13
16
14
15
LP Gas Outdoor Fire Pit
Model No. GAD17401SP