Specifications

Fully aboveground effect
With our standard depth Fiberglass Endless Pool you may purchase a supplementary external bracing system that is installed at the
factory and allows the pool to be freestanding. When this system is used the pool may be installed aboveground. This external bracing
system is not available with our 5' 6" or 6' 0" tall models.
Partially in-ground effect
With this option the pool rests on a solid level surface fully aboveground and a deck is brought up to whatever height is desired
to achieve the built in look. The optional external bracing system is required as described above and if possible the pool should be
braced back to the surrounding deck to increase stiffness. A kneewall is typically constructed to provide a suitable seat or coping
around the pool (See page 8).
Fully in-ground effect
With this option the pool rests on a solid level surface fully aboveground and a deck is brought up flush with the top of the pool to
achieve a built in look. Again, the optional external bracing system is required which is only available with our 5' 0" tall pool (4' 6"
water depth). If possible the pool should be braced back to the surrounding deck to increase stiffness.
ABOVEGROUND WITH OPTIONAL BRACING SYSTEM
2