User`s manual

10) Now repeat the process at the other end of the pool for the

other anchor bracket. Drill the hole, and using the washer and

lag bolt, loosely anchor that roller bracket to the plank. Once

comfortable that the roller mechanism is level and that it

functions properly, tighten all lag bolts to secure the brackets

and roller mechanism in place.

11) Unfold the cover fabric so that the Cover Pools label is facing

up. There is a beaded edge on three sides of the fabric; two

long sides and an end. Slide the leading edge onto the end

bead so that the eye hooks on the leading edge are angled up.

Center the leading edge on the fabric and secure by threading

a 1/2" pan head screw into the bead through one of the pre-

drilled holes in the leading edge at each end.

12) Remove the top half of the black end guide. Bring the leading

edge and fabric up to the track guide. Slide the long side

beaded edge into the track opening and pull the fabric all the