User`s manual

2) Install the track splice between the adjoining tracks. Slide the

plate into the extrusion end of both tracks before placing the

second track on the deck. Two extra splice plates have been

included for the longer Fastlane Pool to help secure the extra

2'-2" long cover track extrusions.

3) Insert black end guides into the end of the track near the roller

at the front of the pool. Refer to Figure 1 and use the provid-

ed 1 1/4" stainless steel wood screws to secure the track to the

wood. Note: Do not use the mounting hardware found in the

Retractable Cover Parts Kit.

4) Slide the hub into the end of the 3" PVC pipe and attach the

hub to the pipe using the self tapping screw that was provided

with the rocky roller kit. Slide the black plastic bushing over

the hub end.

5) Insert the hub end into the white roller bracket and place the

black plastic washer over the hub end.