User`s manual

2) Using the provided 2" deck screws, attach the third 8'-11"

cedar plank to the top of the two planks that are already

attached to the pool frame so that the top edge of this third

plank is flush with the top of the pool.

3) Along the length of the pool on both sides, attach the 12'-9 1/2"

cedar planks to the vertical struts using one self-drilling fas-

tener per strut. The fastener should be drilled through the plank

and into the strut one inch from the bottom of the plank so that

the top edge of the plank should is flush with the top of the

pool.

4) At the front of the pool, lay another 8'-11" plank flat against the

top edge of the vertical plank and the top of the pool’s frame,