Phau Ntawv Qhia

1. Preheat
Method 1
Method 2
2. Feeding
Press and hold the extruder lever then insert 1.75mm
filament through the small hole of the extruder. Continue
feeding until you see filament come out the nozzle.
Tip:How to Replace the Filament
?
1sCutting filament near the Extruder and slowly feed
new filament until they are fed into the new filament.
2sPreheating the nozzle and withdraw the filament
quickly and feed the new filament.
3. Loading Filament
3