Tus neeg siv phau ntawv

1. Preheat

Method 1

Method 2

2. Feeding

Press and hold the extruder lever then insert 1.75mm filament through the small

hole of the extruder. Continue feeding until you see filament out of the nozzle.

Tip：Replacing the Filament

1、Cutting filament near the Extruder and slowly feed

new filament until the new filament get into the PTFE

tube.

2、Preheating the nozzle,Press and hold the extruder,

extract the filament, then feed the new filament.

3. Loading Filament