User`s manual

User’s Manual 1
Chapter 1. Introduction
ENDAT-4066i supports high performance processor of Intel® Pentium4®,
Celeron® and Celeron D ® with 400 and 533 Front Side Bus. It also supports high
speed DDR memory with 64-bit wide interfaces with non-ECC DIMM (up to 1GB).
Only Double Data Rate (DDR) SDRAM memory is supported and the speed of
memory can be 266, 333 and 400 MHz.
ENDAT-4066i provides an integrated graphics (Intel® Extreme Graphics 2)
accelerator delivering cost competitive 3D, 2D, and video capabilities.
ENDAT-4066i video engines support video conferencing and other video
applications. Instead of a dedicated local graphics memory interface, ENDAT-4066i
uses a UMA configuration for optimal memory utilization and performance that
deliver 3D graphics with sharp images, fast rendering, smooth motion and extreme
detail.
ENDAT-4066i contains one integrated Serial ATA host controllers capable of
independent DMA operation on two ports. The SATA controllers are completely
software transparent with the IDE interface, while providing a lower pin count and
higher performance. The data transfer rate is up to 150 MB/s.
ENDAT-4066i is an ideal model for various kind of application:
- POS system
- KIOSK
- Interactive system
- Airport Terminal Controller
- Industrial controller
- Digital entertainment
- Embedded system equipment
2
The ENDAT-4066i System Board
1-1. Features
Basic Feature:
z Board format: Mini-ITX (170mm x 170 mm)
z Supports Socket 478 CPU (FSB 533/400 MHz)
z Digital I/O: 2 bits in and 2 bits out (3.3V)
z Supports DDR 266/ 333/ 400 SDRAM up to 1GB
z Serial ATA connector x 1
z Enhance IDE connector x 2
z Multiple I/O ports: COM port x 2; USB (2.0) x 6
z All COM ports with +5V, +12V power selector
z CMOS backup: EEPROM backup
z Watchdog Timer
z Intel 10/100 LAN and Audio function onboard
z With Intel embedded ATX PCI expansion design
Optional features:
z On board chip provides LVDS interface (18/24/36/48 bit, single/dual
channels) or TV out signals (composite and S-video)
z Second I/O kit for extra 4 COM ports (COM3 to COM6)
z RS 422/485 via COM 2
z Barebones system: niche into Unicorn U-8000 Chassis
Full Software Support:
z Drivers for major operating systems and APIs: Windows 9x / ME,
Windows 2000, Windows XP, Direct3D, DirectDraw and DirectShow,
OpenGL ICD for Windows 9x, and 2000, and DXVA for Windows
2000 and Windows XP