User`s manual
User’s Manual 19
3-1. Standard CMOS Features
The Standard Setup is used for the basic hardware system configuration. The main
function is for Data/Time and Hard Disk Drive settings.
Item Available Options:
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master:
Auto
IDE Channel 0 Slave :
Auto
IDE Channel 1 Master:
Auto
IDE Channel 1 Slave :
Auto
IDE Channel 2 Master:
Auto
IDE Channel 3 Master:
Auto
Video
EGA/VGA
Halt On
All , But Keyboar
20 The ENDAT-4066i System Board
3-2. Advanced BIOS Features
This section allows you configuring your system for basic operation. You have the
opportunity to select the system’s default speed, boot-up priority, keyboard
operation and security.
․APIC Mode
This item can enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance to PC2001 design guide, the system is able to run
in APIC mode. Enabling APIC mode will expand available IRQs resources for the
system. Leave this field in its default setting.
․
MPS Version Control For OS
This item allows you selecting which MPS (Multi-Processor Specification)
version to be used for the operating system. You need to select the MPS version
Item Available Options:
CPU Feature Press Enter
Hard Disk Boot Priority Press Enter
Virus Warning Enabled
CPU L1 & L2 Cache Enabled
Quick Power On Self Test Enabled
USB Flash Disk Type Auto
First Boot Device Hard Disk
Second Boot Device CDROM
Third Boot Device Disabled
Boot Other Device Enabled
Boot Up NumLock Status On
Gate A20 Option Fast
Typematic Rate Setting Disabled
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option Setup
APIC Mode Enabled
MPS Version Control For OS 1.4
OS Select For DRAM > 64MB Non-OS2
Report No FDD for WIN 95 Yes
Delay For HDD (Secs) 0
Small Logo(EPA) Show Enabled