Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-7
SP201-SA™ Customization and Maintenance Guide
Note: To get additional information on the config, show, or reset commands,
type config, show, or reset without any arguments.
7.2.1.2 The alias Command
The alias command lets you define the numbers 0 through 9 to represent
frequently used commands.
How to Use the alias Command
1 At the user> prompt, type alias and press Enter.
 The list of alias commands is displayed.
user> help
*** MAIN COMMAND HELP ***
assign - Assign the CIC range to be used on this card
coldstart - Reset configurable parameters to factory defaults and reset card
config - Configure specified items - use "config help" for more information
dumpchan - Dump CAS channel data for troubleshooting
help - Display this help screen
reset - Reset specified item(s) - use "reset help" for more information
show - Show specified information - use "show help" for more information
trace - Trace SS7 messages
tracechan - Displays information about the CAS protocol for troubleshooting
traceiw - Displays messages between the Q767 and CAS state machines
warmstart - Reset card while maintaining configurable parameters
user>