Specifications

7-6 Chapter 7: Maintenance and Troubleshooting
SP201-SA™ Customization and Maintenance Guide
7.2 Monitoring and Troubleshooting the SP201-SA
Software
The commands in this section help you review the configuration of the
SP201-SA software and determine whether it is performing as you intend.
Note: To configure the SP201-SA, see Chapter 2, Configuration Overview.
7.2.1 User Assistance Commands
The commands in the following subsections help you see which commands
are available, which commands you have used recently, and which alias
commands you can use. Another command dumps (i.e., shows most recent
values) for a channel.
7.2.1.1 The help Command
You can use the help command to display a complete list of the commands
available for use on the SP201-SA.
How to Use the help Command
1 At the user> prompt, type help and press Enter.
 Information similar to the following is displayed:
trace isup Traces all or specified details of SS7/C7
messages. See Section 7.2.5.2, The trace isup
Command.
trace isupmsg Enables ISUP raw message traces. See
Section 7.2.5.4, The trace isupmsg Command.
warmstart Resets the SP201-SA but maintains configured
parameters. See Section 2.4.1, Warmstarting the
SP201-SA.
Table 7-1. Maintenance and Troubleshooting Commands for
the SP201-SA
(4 of 4)
Command Description