Specifications
7-46 Chapter 7: Maintenance and Troubleshooting
SP201-SAâ„¢ Customization and Maintenance Guide
î‚™ The trace aborts and the user> prompt is displayed. Go to
Step 7.
c If you wish to see a list of codes for message type, type ? and press
Enter.
î‚™ The following list appears, followed by the prompt for message
type:
6 Do one of the following:
a To trace all SS7 messages on this CIC, type all and press Enter.
b To trace a specific message type, type its code (for example, iam) and
press Enter.
î‚™ The following message appears, followed by the user>
prompt.
7 If you wish to enable trace isup for another message type, go to Step 1.
How to Disable the trace isup Command
1 You may turn off trace isup at any point. To do so, type trace isup
off and press Enter.
message type, one of
ALL acm anm blo bla ccr cfn cgb
cgba cqm cqr cgu cgua cmc cmr cmrj
con cot cpg cqm cqr cra crm cvr
cvt drs exm faa far fot frj grs
grsa iam inf inr lpa olm pam rel
res rlc rsc sam sus uba ubl ucic
usr
enter "exit" to abort command
Message Type (enter "?" for list):
Command "trace isup on" completed