Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-45
SP201-SA™ Customization and Maintenance Guide
3 Type the point code, in the format x-y-z, and press Enter.
Note: We recommend the default (that is, not typing a point code),
so that the trace will accept transmissions from all point codes.
If you want to use a point code, the system will filter transmissions
to accept messages only from the point code you enter.
Note: Get all point codes from your network administrator.
 The following prompt appears.
4 Type the number of the CIC you wish to trace, and press Enter.
 The following prompt, for message type, is displayed:
5 Do one of the following:
a If you know the code for the message type you wish to trace, go to
Step 6.
b If you wish to abandon the trace, type exit and press Enter.
Point Code :
CIC :
Message Type (enter "?" for list):