Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-35
SP201-SA™ Customization and Maintenance Guide
7.2.4.19 The show trunks Command
You use the show trunks command to display the information about the
trunks configured on the SP201-SA.
How to Use the show trunks Command
1 At the user> prompt, type show trunks and press Enter.
 Information similar to the following is displayed:
7.2.4.20 The show version Command
You use the show version command to view the software version number and
release date.
How to Use the show version Command
1 At the user> prompt, type show version and press Enter.
 Information similar to the following is displayed, where the
Release Date format is month/day/year hour:minute:second. Hours
are shown in a 24-hour format.
user> show trunks
Trunk Dchan Type Protocol
-------------------------
1 T1 R2
2 T1 R2
3 D24I T1 ETSI ISDN
4 D24I T1 ETSI ISDN
user>