Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-33
SP201-SA™ Customization and Maintenance Guide
• If there are several traces available on the SP201-SA, the initial list
is short, but the details may be quite long (depending on the
traces), as shown in the following example.
2 To see detailed trace information (for user and debug commands),
type y and press Enter.
 The user traces for the channels on trunks 1 and 2 are displayed.
Note: The traces shown depend on the software on the SP201-SA.
user> show trace
**************************** TRACE CONFIGURATION *****************************
******************************************************************************
Traces Status
******************************************************************************
isup: on Point code: all CIC: 102 MSG: acm
[2130/08/25 18:22:44]: Command "show trace" completed
user> show trace
******************************************************************************
**************************** TRACE CONFIGURATION *****************************
******************************************************************************
Traces Status
******************************************************************************
ccdebug: off
ccerror: off
cchigh: off
ccmed: off
isdncir0: off
******************************************************************************
Display more traces? (y/n):