Specifications

Commands in an SP201-SA Session 7-3
SP201-SA™ Customization and Maintenance Guide
Table 7-1. Maintenance and Troubleshooting Commands for
the SP201-SA
(1 of 4)
Command Description
alias Defines numbers 0–9 to represent frequently
used commands. See Section 7.2.1.2, The alias
Command.
coldstart Resets configurable parameters to factory
defaults and resets the SP201-SA. You use this
command after downloading new software to
the SP201-SA. See Section 2.4.3, Coldstarting the
SP201-SA.
Caution: Using this command causes all user-
defined settings to be lost. In addition, any calls
in progress are dropped.
config x Configures specified items as described below.
See Section 7.2.2, The config Commands.
config traceflags
No Longer Available. See Section 7.2.5.3,
The trace isdnmsg Command, and
Section 7.2.5.4, The trace isupmsg Command.
help Displays a list of commands you can use to
provision, monitor, or troubleshoot the
SP201-SA. See Section 7.2.1.1, The help Command.
history Lists the most recently used commands. See
Section 7.2.1.3, The history Command.
reset x Resets specified items as described below. Type
reset help for a list of reset commands.
reset chan Resets specified channels to their initial states.
See Section 7.2.3.1, The reset chan Command.
reset stats Resets statistical counters to initial values. See
Section 7.2.3.2, The reset stats Command.
reset systimer Resets the relative clock time to 0 (zero). See
Section 7.2.3.3, The reset systimer Command.
!
!