Specifications

7-26 Chapter 7: Maintenance and Troubleshooting
SP201-SA™ Customization and Maintenance Guide
7.2.4.11 The show fgd Command
If your SP201-SA is running the R1 protocol, you can use the show fgd
command to view the current entries in the Feature Group D (FGD)
information digits translation table.
Note: To add or delete table entries, see Section 3.3.3.2, The config fgd
Command.
How to Use the show fgd Command
1 At the user> prompt, type show fgd and press Enter.
 The system displays the information digits translation table. The
following is an example.
Note: If the informations digits translation table is empty, the
display is similar to the following.
information calling party
digits category
23 8
04 12
24 3
End of table
user>
information calling party
digits category
End of table
user>