Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-25
SP201-SA™ Customization and Maintenance Guide
Note: This command is intended for use by Technical Support personnel
when customers report troubleshooting problems.
How to Use the show events Command
1 At the user> prompt, type show events and press Enter.
 The current list of available events, similar to the following, is
displayed.
user> show events
R2 EVENTS
0 NONE
1 EVT_ACK_TIMEOUT
2 EVT_ANSWER
3 EVT_ANSWER_TIMEOUT
...
78 EVT_BOGUS
R2 STATES
0 INVALID
1 R2_IDLE
2 R2_NO_SERVICE
3 R2_RESET
...
24 R2_BUSY
Q767 EVENTS
0 NONE
1 EVT_ACK_REC
2 EVT_ACK_TIMEOUT
3 EVT_ACM
...
66 EVT_Q7CLEAR
Q767 STATES
0 INVALID
1 S7_IDLE
2 S7C_NO_SERVICE
3 S7_RESET
...
16 S7C_CLEARBACK
Done !
user>