Specifications

7-24 Chapter 7: Maintenance and Troubleshooting
SP201-SA™ Customization and Maintenance Guide
7.2.4.9 The show dchans Command
The show dchans command displays information and status about the
signaling timeslot (D-channel) on each ISDN trunk.
How to Use the show dchans Command
1 At the prompt, type show dchans and press Enter.
 Information similar to the following is displayed.
7.2.4.10 The show events Command
You use the show events command to display a numbered list of defined
events and the states they cause. This list is useful when analyzing trunk/
timeslot problems.
CIC Timeslot peerTimeslot peerCIC
-----------------------------------------------------------
R2-00017 1:17 5:17 00017-Q767
R2-00018 1:18 5:18 00018-Q767
R2-00019 1:19 5:19 00019-Q767
R2-00020 1:20 5:20 00020-Q767
R2-00021 1:21 5:21 00021-Q767
R2-00022 1:22 5:22 00022-Q767
R2-00023 1:23 5:23 00023-Q767
R2-00024 1:24 5:24 00024-Q767
Enter for next page...
any other key to exit...
user> show dchans
******************************************************************************
*************************** ISDN D-CHANNEL STATUS ****************************
******************************************************************************
Trunk FAS/ Signaling Interface Time # of D-Channel
Trunk Type Protocol NFAS Type Type Slot Failures Status
******************************************************************************
3 E1 ETSI ISDN FAS D-Channel Network 16 0000 Inactive
4 E1 ETSI ISDN FAS D-Channel Network 16 0000 Inactive
******************************************************************************
user>