Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-23
SP201-SA™ Customization and Maintenance Guide
How to Use the show connections Command
1 At the user> prompt, type show connections and press Enter.
 A display similar to the following appears. Each line shows the
following:
• The protocol, CIC, trunk, and timeslot for the channel
• The trunk, timeslot, CIC, and protocol for the connected peer
channel
2 After viewing the connections indicated, do one of the following:
a To exit the show connections command, type any character and press
Enter.
 The show connections command aborts, and the user> prompt
is displayed.
b To view the next page of connections, press Enter.
 The next page is displayed. Repeat Step 2.
user> show connections
CIC Timeslot peerTimeslot peerCIC
-----------------------------------------------------------
R2-00001 1:01 5:01 00001-Q767
R2-00002 1:02 5:02 00002-Q767
R2-00003 1:03 5:03 00003-Q767
R2-00004 1:04 5:04 00004-Q767
R2-00005 1:05 5:05 00005-Q767
R2-00006 1:06 5:06 00006-Q767
R2-00007 1:07 5:07 00007-Q767
R2-00008 1:08 5:08 00008-Q767
R2-00009 1:09 5:09 00009-Q767
R2-00010 1:10 5:10 00010-Q767
R2-00011 1:11 5:11 00011-Q767
R2-00012 1:12 5:12 00012-Q767
R2-00013 1:13 5:13 00013-Q767
R2-00014 1:14 5:14 00014-Q767
R2-00015 1:15 5:15 00015-Q767
none 1:16-OOS none none
Enter for next page...
any other key to exit...