Specifications

7-22 Chapter 7: Maintenance and Troubleshooting
SP201-SA™ Customization and Maintenance Guide
7.2.4.8 The show connections Command
The show connections command displays the relationship between a timeslot
and its CIC for each side of the connection. It also indicates the connectivity
between a timeslot and its peer timeslot. The display uses the following
format:
a-u m:n p:q w-b
where:
a is the protocol used for the timeslot’s trunk—for example, R2.
u is the CIC for the timeslot—for example, 00001.
m is the timeslot’s trunk—for example, 1.
n is the timeslot—for example, 01.
and where:
p is the peer timeslot’s trunk—for example, 5.
q is the peer timeslot—for example, 01.
w is the CIC for the peer timeslot—for example, 00001.
b is the protocol used for the peer timeslot’s trunk—for example, C7.
user> show clocks
*********************************************************
*********** FRAMER CLOCK SOURCE CONFIGURATION ***********
*********************************************************
Clock source configured: INTERNAL CLOCK
Clock source being used: Trunk 1
PRIMARY clock source: Trunk 1
SECONDARY clock source: Trunk 7
TERTIARY clock source: LOCAL OSCILLATOR
*********************************************************
user>