Specifications

Monitoring and Troubleshooting the SP201-SA Software 7-21
SP201-SA™ Customization and Maintenance Guide
7.2.4.6 The show ccstates Command
This command displays each ISDN channel’s SS7–ISDN Call Control state
and last event.
How to Use the show ccstates Command
1 At the user> prompt, type show ccstates and press Enter.
 Information similar to the following is displayed.
Note: Square brackets enclose the AGC’s software application part
number and version.
7.2.4.7 The show clocks Command
The show clocks command displays the SP201-SA’s clocking configuration.
How to Use the show clocks Command
1 At the prompt, type show clocks and press Enter.
 Information similar to the following is displayed.
user> show ccstates
State - Last Event) [14598.0705]
Trunk/ts 1 2 3 4 5 6 7 8
3/1 1-0 1-0 1-0 1-34 1-0 1-0 1-0 1-34
3/9 1-0 1-0 1-0 1-0 1-0 1-0 1-0 1-0
3/17 1-0 1-0 1-0 1-0 1-0 1-0 1-0 1-0
3/25 1-0 1-0 1-0 1-0 1-0 1-0 1-0 1-0
4/1 1-0 1-0 1-34 1-0 1-0 1-0 1-0 1-0
4/9 1-0 1-0 1-0 1-0 1-0 1-0 1-0 1-0
4/17 1-0 1-0 1-0 1-0 1-0 1-0 1-0 1-0
4/25 1-0 1-0 1-0 1-0 1-0 1-0 1-0 1-0
user>