Specifications

7-20 Chapter 7: Maintenance and Troubleshooting
SP201-SA™ Customization and Maintenance Guide
 Information similar to the following is displayed:
7.2.4.5 The show buffers Command
The show buffers command indicates the sizes of the message buffers and
the operating system buffers.
How to Use the show buffers Command
1 At the user> prompt, type show buffers and press Enter.
 A display similar to the following appears.
******************************************************************************
* *
* +++ SignalPath Product Line +++ *
* *
* Application: ETSI ISDN/R2 Standalone *
* Application Part Number: 15174.1020 *
* Package Part Number: 15175.1020 *
* Release Date: 02/14/03 05:17:06 *
* *
* *
* Encore Networks, Inc. *
* 45472 Holiday Drive *
* Dulles, Virginia 20166 *
* TEL: [phone] *
* FAX: [phone] *
* http://www.encorenetworks.com *
* *
* *
* Copyright (c) 2002-2003 Encore Networks, Inc. *
* All Rights Reserved *
* *
******************************************************************************
user>
user> show buffers
******************************************************************************
*************************** MESSAGE BUFFERS STATUS ***************************
******************************************************************************
Buffer Size Total Size Total Buffers Buffers Buffers Buffers
Buffer Type (bytes) (bytes) Buffers Used Free Used% Free%
******************************************************************************
General messages 0536 1094512 2042 0018 2024 0.8% 99.2%
CAS messages 4032 0040320 0010 0000 0010 0.0% 100.0%
******************************************************************************
user>