Specifications
7-12 Chapter 7: Maintenance and Troubleshooting
SP201-SAâ„¢ Customization and Maintenance Guide
a To reset a specific channel, type reset chan
m:n
and press Enter.
where m represents the trunk and n represents the timeslot you want
to reset.
î‚™ A message similar to the following is displayed:
b To reset multiple channels, type reset chan
m:n p:r
and press
Enter.
where m:n is the beginning of the range of trunks:timeslots you wish
to reset, and p:r is the end of the range.
î‚™ A message similar to the following is displayed:
c To reset all channels, type reset chan all and press Enter.
î‚™ The SP201-SA asks for confirmation to reset all channels.
2 Do one of the following:
a If you want to reset the channel(s), type y and press Enter.
b If you do not want to reset the channel(s), type n and press Enter.
user> reset chan 1:4
channel reset
user> reset chan 1:4 2:23
channels reset
user> reset chan all
Are you sure you want to reset ALL channels on this card (y or n)? :